Insignia NS-42L260A13 User Manual (English) - Page 53
Specifications - response time
View all Insignia NS-42L260A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Insignia 42" LCD TV Problem Solution After Auto Channel Search, there are no channels. One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons do not work. TV keeps turning off. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure that the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 33. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" on page 29. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" on page 31. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" on page 31. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" on page 32. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" on page 38. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand 39.82 × 25.59 × 3.57 in. (101.1 × 65 × 9.1 cm) 32.85 lbs. (14.9 kg) 39.82 × 27.49 × 10.11 in. (101.1 × 69.8 × 25.7 cm) 39.02 lbs. (17.7 kg) Screen Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value Brightness (center typical) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle Display resolutions HDMI Component video Tuner Analog Digital Inputs HDMI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input DVI USB Outputs Video Analog audio/headphone Digital audio WiFi Ethernet Audio Speakers Power Power consumption Power input 42 in. LCD 120Hz 1080p 1920 (H) × 1080 (V) 16:9 4000:1 25000:1 400 nits 3d y/c digital 6.5 ms 178 178 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i NTSC ATSC, 8-VSB, Clear-QAM 3 (side) E-EDID compliant HDCP compliant 1 (back) 1 (back) Share with Component-Y Yes No 1 (back) 1 (side) 1 (side) (HDMI 1/DVI jack) 1 (side) Supports JPEG and firmware upgrade No 1 (side) 1 (back) No No Number: 2 Watts per channel: 10W On: 170W Standby: