Insignia NS-48D420NA16 User Manual (English) - Page 23
Component video (better
View all Insignia NS-48D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Insignia 48" 1080p 60Hz LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Side of TV On your TV DVD or Blu-ray player Audio cable Component Audio cable video cable connectors connectors Component Analog video jacks audio jacks Component video cable 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player. 3 Connect an audio cable (not provided) to the L and R AUDIO jacks on your TV and to the L and R AUDIO OUT jacks on the DVD or Blu-ray player. Important • The VIDEO/Y, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your DVD or Blu-ray player supports it. • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 4 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to select Component/AV, then press ENTER. 19 www.insigniaproducts.com