Insignia NS-48D420NA16 User Manual (English) - Page 24
AV (composite video) (good), On your TV
View all Insignia NS-48D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. Side of TV On your TV AV cable connector DVD or Blu-ray player Audio cable connectors AV cable AV jack Analog audio jacks 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the green VIDEO/Y jack and L and R AUDIO jacks on your TV and to the AV OUT jacks on the DVD or Blu-ray player. Important • The VIDEO/Y, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your DVD or Blu-ray player supports it. • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 4 Press INPUT to open the INPUT SOURCE list. 5 Press S or T to select Component/AV, then press ENTER. www.insigniaproducts.com 20