Insignia NS-A1111 User Manual (English) - Page 7

NS-A1111_final_translationDTP.fm Page 7 Friday, February 17, 2006 12:09 PM Insignia NS-A1111 5-CD Shelf System Connecting speakers to the shelf system Right speaker box Left speaker box Amplifier speaker conectors AC power cord To connect the speakers: 1 Position the speakers supplied with the shelf system to the right and left of the shelf system. Caution Connecting speakers other than the speakers provided with the shelf system may damage the shelf system. 2 Connect the wires from the speakers to the amplifier speaker connectors. Connecting power to the shelf system Note Before operating the shelf system in a new area for the first time, you must check that the operating voltage of your shelf system is identical to the voltage of your local power supply. This shelf system is to be operated only at the power source voltage printed on the back panel. Disconnect from the power outlet when not in use for a long period of time. To connect the power cord: 1 Make sure that the speakers are properly connected and that the ON/OFF button is set to OFF. 2 Connect the AC power cord to an AC outlet. Connecting the antenna To connect the antenna: 1 Fully unwind the FM wire antenna. Extend the antenna and move it to determine the best sound reception. Note Do not connect the shelf system's FM antenna to an outside antenna. 2 Connect the provided AM loop antenna to the AM LOOP ANTENNA snap terminals on the back of the shelf system, then move it to determine the best sound reception. Connecting external equipment You can connect external audio systems to the shelf system. To connect external equipment: 1 Make sure that the power on the shelf system is off. 2 Plug the jack from the external equipment into the aux in jack (with the music note symbol) on the front panel. Connecting headphones To connect the headphones: 1 Turn down the volume on the shelf system. 2 Plug headphones with a 3.5 mm stereo mini plug into the headphone jack. Note When the headphones are connected, the speakers on the shelf system are automatically disabled. Using your shelf system Turning the shelf system on and off The display changes according to the button pressed or feature selected. To turn the shelf system on and off: 1 When the shelf system is off, press the ON/ OFF button on the shelf system once to turn it on. The display shows d1 and turns on the display backlight. 2 When the shelf system is on, press the ON/ OFF button on the shelf system once to turn it off. The display backlight goes out. When the shelf system is turned off, the clock still shows on the display without a backlight. This is called the standby mode. Note Disconnect the power cord when the unit is not going to be used for a long time. Listening to external equipment To listen to external equipment: 1 Press the ON/OFF button on the shelf system once to turn it on. 2 Press the Function button on the front panel to Aux, indicated by a music note symbol on the display. 3 Turn on the external equipment. Note If the external equipment is a television and this shelf system is close to the TV, you may experience interference if the tuner function is selected while the TV is on. www.insignia-products.com 7