Insignia NS-AC10PWH9 User Guide - Page 14
Using the air conditioner
View all Insignia NS-AC10PWH9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Portable Air Conditioner Using the air conditioner You can control your air conditioner by using the control panel on the front of the unit, or by using the remote control. If using the remote control, always point it at the air conditioner. BUTTON DESCRIPTION MODE Press to turn your air conditioner on or off: • When you turn the air conditioner on, you will hear a tone and the air discharge automatically opens. • When you turn your air conditioner off, you will hear a tone and the air discharge closes. Control settings, such as Mode, Set Temperature, and so on, are retained in memory when the power is off (unless the unit has been unplugged). Press to cycle through the operating modes (COOL, FAN, or DRY): • COOL: The compressor runs and cools the room. Use the or and SPEED buttons to set the desired temperature and fan speed. • FAN: The fan circulates the air, but the compressor does not run to cool it. Use the SPEED button to set the desired fan speed. • DRY: The dehumidifier runs to remove humidity from the air. After the ambient temperature is reached the compressor turns off. The fan speed is preset and cannot be adjusted. We recommend that you use a drain hose in dry mode (see "Using your portable air conditioner" on page 13 for instructions). Note: The LED next to the Mode button displays the active mode. The default mode is COOL. Cycles through the available fan speeds. The LED next to the SPEED button displays the fan SPEED speed. The speed can be selected in either the COOL or FAN modes. TIMER SWING • COOL mode: Press to adjust the temperature setting up to 86°F (30°C) or down to 60°F (a1n6d°CC)e, lisniuosnbeydpergerseseinigncremanednts. Tahtethteemsapmereattuimreec, aonr be by switched between Fahrenheit pressing the °C/°F switching button on the remote control. Note: In fan and dry modes, the temperature displayed is the room temperature (not the set temperature). In COOL mode, the thermostat in the air conditioner runs the compressor until the set temperature is reached, then the compressor cycles on and off to maintain the set temperature. • TIMER mode: Press or to adjust the delay time from one to 24 hours, in one hour increments. If you press and hold or , the set temperature or time changes automatically. Press to set your air conditioner to turn off or turn on after a delay of up to 24 hours. • Automatic off: Press or while the air conditioner is running to set the delay time from one to 24 hours, in one hour increments. The air conditioner automatically turns off • wAuhteonmthaetisceotnd:ePlareystsime is or reacwhheidle. the air conditioner is off to set the delay time from one to 24 hours, in one hour increments. The air conditioner automatically turns on when the set delay time is reached. Press the TIMER button to see the delay time you have set on the LED display. To change the set delay time (on or off): Press the TIMER button, then adjust the time with the or buttons when the number begins to blink. To cancel the Timer function: Press the TIMER button, then press it again when the number begins to blink. Note: Do not unplug the air conditioner while using the Timer function. After setting the Timer function, if you use the remote control to change to another mode without resetting the Timer function, the timer is reset. Press to turn on the automatic oscillation, which varies the direction of the air flow to cool the room more efficiently. 14 www.insigniaproducts.com