Insignia NS-BC120BS8 User Guide - Page 15
Troubleshooting
View all Insignia NS-BC120BS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
48-, 78-, 115-Can Beer and Beverage Cooler Troubleshooting Caution Do not try to repair your beer and beverage cooler yourself. Doing so invalidates the warranty. Fault indication If a fault is detected, the display shows one of the following codes: Fault code E1 E2 Description Temperature sensor fault Defroster sensor fault Note When the above faults are displayed, do not attempt to repair the cooler by yourself. Please contact customer service for help. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The beer and beverage The beer and beverage cooler Make sure that the beer and beverage cooler is plugged in and cooler does not operate is unplugged. that the plug is pushed completely into the outlet. The fuse on the circuit is blown Check the house fuse/circuit breaker box and replace the fuse or or the circuit breaker is reset the circuit breaker. tripped. Power failure. If a power failure occurs, the beer and beverage cooler turns off. Wait until the power is restored, then turn it on again. The cooler door does not close completely The shelf is out of position. The door gaskets are dirty. Adjust the shelf properly. Clean the door gaskets. The cooler is not level. Level the cooler with the leveling feet. The cooler is not cold enough The door has been opened too Make sure that the door is closed properly. often or was not closed properly. You have just added a large Allow time for the new beverage to cool, then check again. amount of warm beverage to the cooler. The temperature control is set Set the control to a colder setting. too warm. www.insigniaproducts.com 15