Insignia NS-BC120BS8 User Guide - Page 16
Problem, Possible Cause, Possible Solution
View all Insignia NS-BC120BS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8 PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The beer and beverage cooler makes unusual noises or vibrates The cooler is not level. The body of the beer and beverage cooler is touching a wall. Level the beer and beverage cooler with the leveling feet. Move the beer and beverage cooler out from the wall. • A rattling noise may be heard. This is caused by the flow of refrigerent in the beer and beverage cooler. • As each cooling cycle ends, you may hear gurgling sounds. • Contraction and expansion of the inside walls may cause popping or crackling noises. This is normal. Moisture is building up The door has been opened too Make sure that the door is closed properly. in the interior of the often or was not closed cooler properly. The cooler is in a location that Move the cooler to a dryer location. is very humid. The cooler turns on and The room temperature is off frequently hotter than normal. Cool the room or move your beer and beverage cooler to a cooler place. The door has been opened too Make sure that the door is closed properly. often or was not closed properly. The door gaskets do not seal Clean the door gaskets. properly. The temperature control is set Set the control to a colder setting. too warm. The humidity level in The door has been opened too Make sure that the door is closed properly. your cooler is too low often or was not closed properly. The cooler is in a location that Move the cooler to a cooler location. is too hot. Relative humidity is too low. Place a cup of water inside the cooler to raise the humidity. 16 www.insigniaproducts.com