Insignia NS-BC2ZSS8 User Guide - Page 10

NS-BC2ZSS8 Using your wine and beverage center Turning on your cooler Press the button to turn your cooler on. The display screen and indicators blink for three seconds and an audible beep will be heard, then the compressor starts working. You can manually set your unit to "Standby" mode by touching the button for approximately three seconds, provided that no other setting is in effect (the display is not blinking). Repeating this action restarts the unit. Setting the temperature Under normal conditions, the temperature always shows the set temperature. When adjusting the temperature, the temperature display blinks to indicate that the temperature is being adjusted. The temperature in the left and right zones can be set independently by using the control panel located in each zone. The temperature range of both zones can be set between 37° F to 64° F (3° C to 18° C) ± 5° F (± 3° C). When the or buttons are pressed, the temperature will increase or decrease in increments of one degree. If the or buttons are pressed and held for two seconds, the temperature will increase or decrease at a speed of one degree per half second. After you have adjusted the left and/or right zone to the temperature you want, release the button. The temperature display will blink for approximately three seconds to confirm the selected temperature. After the display stops blinking, the temperature display will indicate the set temperature of that zone. Notes: • A large number of bottles will lower the cooling efficiency of the cooler. • Adjust the thermostat setting by one increment at a time. Allow several hours for the temperature to stabilize between adjustments. Changing the temperature display The temperature display can be exchanged between Celsius and Fahrenheit by simultaneously pressing and holding the buttons for approximately three seconds. Understanding the dual temperature zones There are two temperature zones in this appliance. They are divided by a partition. • Each zone has its own independent temperature control and display. • Each zone can be used to store wine bottles or beverage cans. • Each zone can hold up to 21 bottles or 57 cans. 10 www.insigniaproducts.com