Insignia NS-BC2ZSS8 User Guide - Page 9

Dual-Zone Wine and Beverage Center Leveling your cooler • It is very important for the cooler to be level in order to function properly. If the cooler is not leveled during installation, the door may not close or seal properly, causing cooling, frost, or moisture problems. • To level your cooler, you may either turn the leveling foot clockwise to raise that side to the cooler or turn it counter-clockwise to lower that side. Grounding requirement This cooler must be grounded. This cooler is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the cooler is properly grounded. WARNINGS: • Improper use of the grounding plug can result in a risk of electric shock. • Do not, under any circumstances, cut or remove the third ground prong from the supplied power cord. Connecting to power • Plug the appliance into a dedicated, properly installed grounded wall outlet. This appliance should be operated on a separate electrical circuit from other operating appliances. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. CAUTION: This unit is not designed to be installed in an RV or used with an inverter. • Plug in and run your cooler for three to four hours before making any temperature adjustments and before adding wine. This allows your cooler to reach a stable temperature. Notes: • Check your local power source. This cooler requires a 110 V-120 V, 60 Hz power supply. • Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this cooler. • Do not use an extension cord with this cooler. If the power cord is too short, have a qualified electrician install an outlet near the cooler. Use of an extension cord can negatively affect the cooler's performance. www.insigniaproducts.com 9