Insignia NS-BC48SS3 User Guide - Page 8

Using your beverage cooler Standby Light button button Display Temperature up/down buttons Display When you plug in your beverage cooler for the first time, the display screen turns on for three seconds, then the start-up tone rings. CAUTIONS: • The control buttons should be pressed gently. • Avoid scratching the control panel with sharp objects. • Keep magnets away from the control panel. Otherwise your cooler does not set and operate normally. Standby mode To enter standby mode, press the Standby button continuously for three seconds. The buzzer sounds and the display turns off. To return to normal mode, press and hold the Standby button for three seconds. Light button Press the Light button to turn on or turn off the light. The buzzer sounds when the light is turned on or off. Setting the temperature Press the Temperature Up ( ) or Temperature Down ( decrease the temperature by one degree. The temperature range is 34° ~ 50° F (1° ~ 10° C). ) button to increase or Switching the temperature setting between Fahrenheit and Celsius Press and hold the Temperature Up ( ) and Temperature Down ( ) buttons at the same time for three seconds to switch between Fahrenheit and Celsius. Quick Cool mode After adding a large number of beverages, use Quick Cool mode to cool them down quickly. The cooler remains in this mode for 24 hours or until you turn it off. Press and hold the Standby and Light buttons for three seconds to turn Quick Cool mode on or off. The display shows "FC" when in Quick Cool mode. Memory function When your cooler is turned off, it remembers the currently set temperature and returns to that setting when it's turned back on. 8 www.insigniaproducts.com