Insignia NS-BRHTIB User Manual (English) - Page 18

NS-BRHTIB Blu-ray Disc Home Theater System Selecting the digital audio output mode To select the digital audio output mode: 1 Press ENTER. The Settings menu opens. Settings Netwo rk Display Audio Language Parental System Au dio Digital Output PCM Dynamic Range Control Off 2 Press or to select Audio. The Audio menu opens. 3 Press , press or to select Digital Output, then press ENTER. 4 Press or to select the digital output mode you want, then press ENTER. You can select: • PCM-Sends mixed digital audio over the HDMI connection in 7.1CH PCM (if supported by the HDMI device) and the SPDIF connection in two-channel PCM format. • Bitstream HD-Sends the original bitstream from the disc over the HDMI and SPDIF connections using highest quality possible. HDMI has the higher quality capabilities with advanced audio codecs like TrueHD and DTS-HD. Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio and no effects audio). • Bitstream Legacy-Sends the original bitstream from the disc over the HDMI and SPDIF connections using legacy audio formats. Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio and no effects audio). • Bitstream mixed-Sends mixed and encoded Blu-ray audio streams in a single bitstream. This mode is primarily intended for use with SPDIF 5.1CH receivers to produce mixed Blu-ray audio in surround sound. 5 Press to go to the previous menu. Turning dynamic range control on or off Dynamic range control is only active when a Dolby Digital signal is detected. When Dynamic Range Control is set to Off, movie soundtracks are played with the standard dynamic range. When movie soundtracks are played at low volume or from smaller speakers, you can set Dynamic Range Control to On. Your player applies appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. To turn dynamic range control on or off: 1 Press ENTER. The Settings menu opens. Settings Netwo rk Display Audio Language Parental System Au dio Digital Output PCM Dynamic Range Control Off 2 Press or to select Audio. The Audio menu opens. 3 Press , press or to select Dynamic Range Control, then press ENTER. 4 Press or to select On or Off. 5 Press to go to the previous menu. Setting the parental control password To set the parental control password: 1 Press ENTER. The Settings menu opens. Audio Language Settings Parental System Ne twork Display Parental Parental Country Parental Control Parental Level Parental Password USA On 8[Audlt ] 2 Press or to select Parental. The Parental menu opens. 3 Press . The password screen opens. 4 Enter the default password (0000). If you forget your password, reset your player to the factory defaults. The password will be reset to 0000. For more information, see "Resetting settings to the factory defaults" on page 17. 5 Press to go to the previous menu. 6 Press or to select Parental Password, then press ENTER. 7 Enter your new password. Turning parental controls on or off To turn parental controls on or off: 1 Press ENTER. The Settings menu opens. Audio Language Settings Parental System Ne twork Display Parental Parental Country Parental Control Parental Level Parental Password USA On 8[Audlt ] 14 www.insigniaproducts.com