Insignia NS-C2112 User Manual (English) - Page 6

NS-C2112 AM/FM clock radio Setting the sleep timer To set the sleep timer: 1 Press the Sleep button. The radio turns on, plays the last tuned station, and "30" displays. 2 Select the time (5 to 30 minutes) by repeatedly pressing the Sleep button. The Sleep/Alarm/Snooze indicator turns on until the radio turns off at the preset time. 3 Cancel Sleep mode by pressing the Power Off/Alarm Off button. Using the alarm You can set up to two alarm times. The radio must be turned off while setting the alarm times. SETTING THE ALARM To set the alarm: 1 Press the Alarm 1 Set or Alarm 2 Set/Store button. The Alarm 1 or Alarm 2 indicator turns on and the hour number flashes. 2 Turn the Up/Down knob to adjust the hour until the hour number you want displays. (Turning and holding the knob for more than three seconds increases the adjustment speed.) 3 Press the Alarm 1 Set or Alarm 2 Set/Store button again. The Alarm 1 or Alarm 2 indicator and the minute number flash. 4 Turn the Up/Down knob to adjust the minute until the minute number you want displays. 5 Press the Alarm 1 Set or Alarm 2 Set/Store button to confirm your settings and go back to clock mode. 6 Turn the Alarm 1 Radio/Buzzer/Off or Alarm 2 Radio/Buzzer/Off switch to Radio or Buzzer. The Alarm 1 or Alarm 2 indicator turns on. The Sleep/Alarm/Snooze indicator flashes while Alarm 1 or Alarm 2 is active. 7 Press the Power Off/Alarm Off button to stop the alarm. 8 Turn the Alarm 1/Radio/Buzzer/Off or Alarm 2/Radio/Buzzer/Off switch to Off. The Alarm 1 or 2 indicator turns off and Alarm 1 or 2 is switched off. Note If the two alarm times are the same, only Alarm 1 will sound at the alarm time. If the two alarm times are close, the first alarm will stop when the second one sounds. Using snooze To use snooze: When the alarm sounds, press the Snooze button. The alarm stops and the Alarm/Sleep/Snooze indicator flashes. After about eight minutes, the alarm sounds again. 4 www.Insignia-Products.com