Insignia NS-CADVD User Manual (English) - Page 13

Insignia NS-CADVD DVD Player Maintaining Cleaning the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia, or abrasive cleaners. They may damage the cabinet. Handling discs • To keep a disc clean, do not touch the play side (non-label side) of the disc. • Do not attach paper or tape to the disc. • Keep the disc away from direct sunlight or heat sources. • Store the disc in a disc case after you remove it from your recorder. Cleaning discs • Before playback, wipe the disc outwards from the center with clean cloth. Troubleshooting Problem No power Solution • Make sure that the power cord is plugged into a power outlet. • Make sure that your player is turned on. Problem Disc does not play No picture Picture noise or distortion Picture not full screen General malfunction Solution • Make sure that a disc is in the disc tray. • Make sure that the disc label is facing up. • Make sure that the region code on the disc matches your player's region code. The disc's region code should be on the disc or the disc packaging. The region code for your player is 1. • The DVD's rating level may be higher than the rating level your player is set up to play. • The disc may not be a supported disc. For more information, see "Playable discs" on page 2. • The disc may be damaged or dirty. Clean the disc or try another disc. For more information, see "Cleaning discs" on page 11. • Moisture may have condensed inside your player. Remove the disc, then leave your player turned on for one or two hours to let the moisture evaporate. • Make sure that the TV is turned on. • Make sure that the TV is set to the correct video input setting. See the documentation that came with the TV. • Make sure that the video cable(s) are connected securely. For more information, see the topics in "Setting up your player" on page 4. • The disc may be damaged or dirty. Clean the disc or try another disc. For more information, see "Cleaning discs" on page 11. • The disc may be damaged or dirty. Clean the disc or try another disc. For more information, see "Cleaning discs" on page 11. • Reset the color system on the TV. For more information, see the documentation that came with the TV. • Make sure that your player is connected directly to the TV. • Make sure that you have selected the correct aspect ratio for your player. For more information, see "Selecting the TV type" on page 6. • Make sure that you have selected the correct aspect ratio from the DVD disc menu. • Unplug your player for 30 minutes, then plug it back in and turn it on. Your player should operate normally. www.insignia-products.com 11