Insignia NS-CFL45GP1 User Guide - Page 12
reinstall both of the leveling feet and the spare bolt to the bottom front of
View all Insignia NS-CFL45GP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6 Install the lower hinge on the bottom left side of the refrigerator cabinet, then reinstall both of the leveling feet and the spare bolt to the bottom front of the cabinet. Lower hinge Leveling foot Spare bolt Leveling foot 7 Remove the door stop from the lower right side of the refrigerator door, then reinstall it on the lower left side of the refrigerator door. Door Door stop 8 Gently lower the door onto the lower hinge, making sure that the hinge pin goes into the hinge. Hold or tape the door in place temporarily. 9 Install the upper hinge and hinge on the left side of the refrigerator cabinet, making sure that the hinge pin on the door goes into the hinge. Hinge cover Hinge Door Hole cover Note: Make sure that the top of the door is level with the top of the refrigerator cabinet. If the door is not level, the rubber gasket will not make a good seal with the cabinet, which can cause problems with the refrigerator. 12 www.insigniaproducts.com