Insignia NS-CFL45GP1 User Guide - Page 13

Using your refrigerator

Page 13 highlights

4.4 Cu. Ft. Glass Door Compact Refrigerator 10 Remove the tape and try the door to make sure that it swings easily. Using your refrigerator CAUTIONS: • If you run your refrigerator at an ambient temperature below 50° F (10° C) or above 109° F (43° C) it will have to work harder to maintain the correct temperature. • Internal temperatures can vary, based on the location of your refrigerator, the ambient room temperature, amount of food stored, and how often the door is opened. Setting the thermostat When you plug in your refrigerator for the first time, the compressor and the interior light start working immediately. The default thermostat setting is 4. Before storing food in your refrigerator, you should let it run for 24 hours to make sure it is working correctly and allow the refrigerator compartment to reach the correct temperature. Adjust the temperature by turning the thermostat dial. Available settings are between 1 and 7, 1 being the warmest and 7 being the coldest. The recommended setting for normal use is 4. To turn off your refrigerator, set the thermostat to OFF. Notes: • Turning the thermostat to OFF stops the cooling cycle but doesn't shut off the power to your refrigerator. • If your refrigerator is unplugged or loses power, you must wait three to five minutes before restarting it. If you try to restart it before this time delay, your refrigerator won't start. • Large amounts of food lower the cooling efficiency of your refrigerator. • When changing the thermostat setting, adjust it one increment at a time. Wait several hours for the temperature to stabilize between adjustments. www.insigniaproducts.com 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

13
4.4 Cu. Ft. Glass Door Compact Refrigerator
www.insigniaproducts.com
10
Remove the tape and try the door to make sure that it swings easily.
Using your refrigerator
Setting the thermostat
When you plug in your refrigerator for the first time, the compressor and the
interior light start working immediately. The default thermostat setting is 4.
Before storing food in your refrigerator, you should let it run for 24 hours to make
sure it is working correctly and allow the refrigerator compartment to reach the
correct temperature.
Adjust the temperature by turning the thermostat dial. Available settings are
between
1
and
7
,
1
being the warmest and
7
being the coldest. The
recommended setting for normal use is
4
. To turn off your refrigerator, set the
thermostat to
OFF
.
CAUTIONS
:
If you run your refrigerator at an ambient temperature below 50° F (10° C) or
above 109° F (43° C) it will have to work harder to maintain the correct
temperature.
Internal temperatures can vary, based on the location of your refrigerator, the
ambient room temperature, amount of food stored, and how often the door is
opened.
Notes
:
Turning the thermostat to
OFF
stops the cooling cycle but doesn’t shut off the
power to your refrigerator.
If your refrigerator is unplugged or loses power, you must wait three to five
minutes before restarting it. If you try to restart it before this time delay, your
refrigerator won’t start.
Large amounts of food lower the cooling efficiency of your refrigerator.
When changing the thermostat setting, adjust it one increment at a time. Wait
several hours for the temperature to stabilize between adjustments.