Insignia NS-CL1112 User Manual (English) - Page 11

Insignia NS-CL1112 Clock Radio with iPod Dock Using your clock radio Before using your clock radio, make sure all connections are good, then plug the AC adapter into your clock radio and an AC power outlet. Turning your clock radio on and off To turn on your clock radio: 1 Press STANDBY/ON. Your clock radio turns on. 2 Press SNOOZE/DIMMER to control the brightness of the LCD. 3 Press STANDBY/ON again to switch your clock radio to standby mode. Setting and using the alarm To set the alarm: 1 Press and hold the ALARM1 or ALARM2 button for two seconds. The hour digits, the "ALARM 1" or "ALARM 2" flag, and the source icon (BUZZER is the default) start to blink. 2 Turn the TUNING/SKIP knob to set the hour you want the alarm to wake you. 3 Press the ALARM1 or ALARM2 button. The minute digits start to blink. 4 Turn the TUNING/SKIP knob to set the minutes at which you want the alarm to wake you. 5 Press the ALARM1 or ALARM2 button again, then turn the TUNING/SKIP knob to select AL-H (alarm volume high) or AL-L (alarm volume low). 6 Press ALARM1 or ALARM2 to store the setup. Notes • During alarm setting, if no button is pressed within 10 seconds, the system will exit alarm setting mode automatically, without storing the settings. • The Alarm1 default setting is 6:00, and the Alarm2 default setting is 7:30 (12H format only - the word "AM" or "PM" is shown) 7 Press the ALARM1 or ALARM2 button again. The ALARM turns off. 8 Press the ALARM1 or ALARM2 button two times. The ALARM turns on, then turns off. www.insigniaproducts.com 11