Insignia NS-DACMSFK User Manual (English) - Page 8
Using your flash kit
View all Insignia NS-DACMSFK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-DACMSFK_14-1192_V2_MAN_ENG.book Page 8 Monday, November 17, 2014 2:24 PM NS-DACMSFK AC Master/Slave Flash Kit Using your flash kit To use your flash kit: 1 Assemble your flash kit. See "Assembling your flash kit" on page 5. 2 If you are not using a PC sync cable, position the flash heads so that the light sensor on your flash head has a clear line-of-sight to the camera's flash. 3 Point the flash head toward the surface you want the light to reflect off of. You can point the flash toward an umbrella or a wall or other surface. 4 Plug the power cord on the light holder into a power outlet, then press the power switch on the on back of the flash head. When the flash is fully charged, the READY indicator lights green. 5 If necessary, adjust the flash intensity. Turn the intensity knob clockwise to increase the flash intensity or counter-clockwise to decrease the flash intensity. Note If you decrease the flash intensity, press the TEST button to release the stored power. When the flash recharges, the amount of stored power matches to lower setting. 6 Take a picture. Tips For best results: • Take several shots. • If the picture is too dark, increase the flash intensity. • If the picture is too light, decrease the flash intensity or adjust the camera's exposure. • If the picture has unwanted shadows, move the flash or use an umbrella to filter the light from the flash. 8 www.insigniaproducts.com