Insignia NS-DH50WH9 User Guide - Page 6
Before using your dehumidifier
View all Insignia NS-DH50WH9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Control Panel 30-, 50-, or 70-Pint White Dehumidifier # FEATURES 1 Full 2 Defrost 3 Continuous (Cont.) 4 Turbo 5 Timer 6 LED display 7 Power 8 Filter Reset 9 ± buttons FUNCTION Lights up when the bucket is ready to be emptied. Lights up when the auto defrost function is running. Auto defrost runs when too much frost builds up on the evaporator coils. The compressor turns off during defrost. Press to activate the continuous dehumidifying operation. Press to select either Turbo or normal fan speed. Set the Turbo control to high for maximum moisture removal. Turn off Turbo when your room humidity is at your preferred level. Press to set the Power On and Power Off timers. • Displays the humidity level from 35% to 85% while setting the desired humidity level. • Displays the auto start/stop time (0-24) while setting the Timer. • Displays the room humidity level from 30% humidity to 90% humidity. Press to turn the dehumidifier on and off. Lights up after 250 hours of use to indicate when to clean the filter. Press the button after cleaning the filter to reset the timer and turn off the LED indicator. Press to set the dehumidifier's humidity level and to set the Power On and Power Off timers from 0 to 24 hours. Before using your dehumidifier 1 Remove the power cord storage bracket from your dehumidifier's bucket, then insert the power cord storage bracket into the back of your dehumidifier. The power cord storage bracket will click into place. Power cord storage bracket 6 www.insigniaproducts.com