Insignia NS-DSC1112 User Manual (English) - Page 29

Insignia 12 Megapixel Camera Transferring files to a computer You can transfer photos and video files to your computer. To transfer files to a computer: 1 Connect the camera to a camera using the supplied USB cable. 2 Turn on the camera. The computer detects the connection. Your camera's internal memory and memory card display as removable drives in the file manager. No image is displayed on the LCD. Caution Connecting your camera to a computer using the USB connector will not recharge your camera's batteries or enhance battery life. Make sure that you disconnect your camera from the computer and power down your camera when you are finished transferring files to your computer. Note You can also use a card reader to access the memory card contents of your camera. Troubleshooting Problem Cause and/or Action Camera does not turn on The batteries may be exhausted. Charge or replace the batteries. Camera turns off automatically Press any button except POWER button to turn on the camera. LCD turns blank Press any button except POWER to turn on the LCD. Empty battery icon is displayed Batteries are exhausted. Replace or recharge the on the LCD, then the camera batteries. turns off. LCD screen displays "No image" No images have been stored in the memory media currently in use. The image file format stored on a memory card may not be supported. LCD screen displays "Not avail- Function is only available for specific file types. able for this file" File format is not supported. LCD screen displays "Memory Memory card is full. Replace the memory card with full" a new one or delete unnecessary files. LCD screen displays "Card locked" The memory card is protected. Remove the card and slide the write-protect switch to its unlocked position. LCD screen displays "Copy error" The memory card is protected. Remove the card and slide the write-protect switch to its unlocked position. The memory card is full. Replace card or delete unnecessary files. The lens does not retract Do not force the lens to go back. The type of the batteries used may be incorrect or the battery power level is too low. Replace the batteries or charge the batteries (if using rechargeables) before using your camera. www.insigniaproducts.com 25