Insignia NS-DXFL2N User Manual (English) - Page 9
Using your flash, Fully automatic flash shooting, Using Flash Exposure Compensation (FEC)
View all Insignia NS-DXFL2N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
NS-DXFL2N External TTL Flash for Nikon™ Using your flash Fully automatic flash shooting Setting the camera's shooting mode to P (Program AE) or AUTO (Full Auto) makes automatic shooting as easy as normal AE shooting. 1 Set the flash to i-TTL auto flash mode by pressing the MODE button repeatedly until the "TTL" indicator lights on the back of the flash. 2 To focus the camera, press the shutter button halfway. The shutter speed and aperture is displayed in the camera viewfinder. Make sure that the icon is shown in the camera viewfinder. Before the shot is recorded by the camera, the flash fires a pre-flash. This is immediately followed by the main flash. Using Flash Exposure Compensation (FEC) Using FEC, this flash can adjust from -1 to +1 in 1/3rd stops. This is useful in situations where minor adjustments of the TTL system are needed, based on the environment. Notes • The flash exposure compensation amount can only be set in TTL mode. • If the camera has also set the flash exposure compensation amount, the final flash amount is determined by the combined effects of the two amounts. 1 Check the indicator light on the back of the flash to make sure that the flash is set to TTL mode. 2 Set the flash exposure compensation number by pressing the - or + button. 3 To cancel flash exposure compensation, set the number to "+0.0". www.insigniaproducts.com 9