Insignia NS-HAIOR18 User Guide - Page 12

NS-HAIOR18/NS-HAIOR18-C Using Bluetooth Pairing your Bluetooth device 1 Make sure that your Bluetooth device (like a music player or phone) is turned on and within 33 ft. (10 m) of your shelf system. 2 On your Bluetooth device, navigate to your Bluetooth settings: • For iOS devices: Tap Settings > General > Bluetooth. • For Android devices: Tap Settings > Wireless and networks. Tap to activate Bluetooth, then tap Bluetooth settings. • For PC or Mac computers: See the instructions that came with your computer for more information. 3 Press SOURCE repeatedly until the shelf system displays "BT." Your shelf system enters Bluetooth pairing mode. Note If your shelf system isn't paired in 15 seconds, "NOBT" appears on the screen. Press SOURCE repeatedly to cycle back to "BT" to re-enter pairing mode. For best results, try to enable Bluetooth on your Bluetooth device (step 2) and select the source on your shelf system (step 3) at the same time. 4 On your Bluetooth device, select NS-HAIOR18 in the list of devices. The shelf system beeps twice when paired. Note If prompted, enter "0000" as the passcode. Playing Bluetooth audio Playback is controlled by the Bluetooth device, by the buttons on the front of your shelf system, and by the remote control (such as VOL+/-, , , and ). Disconnecting your Bluetooth device • Turn off the Bluetooth function on your device. OR • Press SOURCE to change your shelf system's input source. 12 www.insigniaproducts.com