Insignia NS-HAIOR18 Quick Setup Guide - Page 2

NS-HAIOR18_16-1139_QSG_V1_EN.ai 2 2/24/2017 10:49:11 AM USING YOUR SHELF SYSTEM BLUETOOTH Pairing your device 1 Make sure that your Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your shelf system. 2 On your Bluetooth device, navigate to your Bluetooth settings: • For iOS devices: Tap Settings > General > Bluetooth. • For Android devices: Tap Settings > Wireless and networks. Tap to activate Bluetooth, then tap Bluetooth settings. • For PC or Mac computers: See the instructions that came with your computer for more information. 3 Press SOURCE repeatedly until the shelf system displays "BT." Your shelf system enters Bluetooth pairing mode. Note: If your shelf system isn't paired in 15 seconds, "NOBT" appears on the screen. Press SOURCE repeatedly to cycle back to "BT" to re-enter pairing mode. For best results, try to enable Bluetooth on your Bluetooth device (step 2) and select the source on your shelf system (step 3) at the same time. 4 On your Bluetooth device, select NS-HAIOR18 in the list of devices. The shelf system beeps twice when paired. Note: If prompted, enter "0000" as the passcode. Playback • Use your Bluetooth device to select audio. • Make sure that your Bluetooth device's volume is set to at least 50%. • Control playback with your Bluetooth device, remote, and the controls on the shelf speaker system (play/pause, mute, previous/next). USING THE FM RADIO Note: Make sure that your antenna is attached. 1 Press SOURCE until the display says "FM." 2 To select a radio station: • To incrementally tune the radio frequency, press  (previous) or  (next). • To search for the next available station, press and hold  (previous) or  (next). • To skip to a preset station, press PRESET- or PRESET+ repeatedly. Note: See "Adding a preset station" for instructions about creating preset stations. Adding a preset station Note: You can program up to 30 stations. 1 Select the station, then press PROG on your remote. 2 Press PRESET - or PRESET + to select a program number. 3 Press PROG again to save the preset station. OR To program all stations, press AUTO. Your shelf system automatically assigns a program number to each available station. USING THE CD PLAYER Your CD player works with CD, CD-R, and CD-RW formats. 1 Press SOURCE until the display says "CD." 2 Insert your CD label-side up into the disc slot. Playback begins automatically. 3 Use your remote or shelf system to control playback. See your online User Guide for more information. 4 When finished, press  (eject) to eject your disc. CONNECTING WITH USB Note: You can charge USB devices through the USB port (5V/1A output). 1 Connect a USB flash drive to your shelf system's USB port. 2 Press SOURCE repeatedly until the display says "USB." 3 Use the controls on your shelf speaker system or remote to control playback: • Press  or  to skip to the previous or next track. • Press or to navigate through your USB flash drive's folders. • Turn the volume knob or press Vol+ or Vol- on your remote to adjust the volume. CONNECTING WITH AN AUDIO CABLE 1 Connect a 3.5 mm audio cable (not included) from your audio device to the shelf system's LINE IN jack. 2 Press SOURCE repeatedly until the display says "LINE IN." 3 Use your audio device to control playback and the controls on your shelf system to adjust the volume. Note: Make sure that your audio device's volume is set to at least 50%. CONNECTING HEADPHONES • Connect your headphones to the headphone jack. SPECIFICATIONS • Dimensions (HxWxD): 5.51 x 11.22 x 18.5 in. (140 x 285 x 470 mm) • Weight: 12.8 lbs. (5.8 kg) • Power supply: ~100-240V AC, 50/60Hz • Audio output power: 20W × 2 + 40W • Frequency response: 20Hz~20kHz (±3dB) • CD compatibility: CDs, CD-Rs, CD-RWs in standard or 3" size • Supported file formats (USB): MP3 • FM frequency: 87.5 - 107.9 MHz • Operating environment: 14°~95°F (-10°~35°C), 5~90% humidity • Bluetooth: 2.4 GHz, 33 ft. (10 m) working distance • Input jacks: USB and LINE IN FCC STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RSS-Gen & RSS-210 statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 Statement: This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. ONE-YEAR LIMITED WARRANTY Visit www.insigniaproducts.com for details. CONTACT INSIGNIA: For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2017 Best Buy. All rights reserved. Made in China V1 ENGLISH 16-1139