Insignia NS-HAWHP2 User Manual - Page 17

5.8 GHz Digital Wireless Stereo Headphones Turning off the system NOTE: It's important to turn the headphones off when not in use to conserve the battery. OR, if you prefer, you can leave them on as long as they are placed in the docking station. 1 Press and hold (more than two seconds) the (power) button on the headphones. 2 Disconnect the AC power adapter to turn off the docking station. Understanding indicator lights LED Behavior Solid blue Blinks blue Solid red Solid green LED off Solid white Headphones' LED blinks red 3 times every minute Description The headphones are paired to the dock. Searching for a connection. The headphones are charging. The headphones are fully charged. Headphones' power/pairing LED: • If not on the dock, the headphones are turned off, or • If on the dock, the headphones are fully charged. Dock charging LED: • The headphones are turned off and not on the dock, or • The dock is not connected to power. An input source is selected (RCA or OPTICAL). Note: You must remove the headphones from the dock to select a source. The headphones' battery is low. Place your headphones on the dock to charge. Maintaining your system With the docking station unplugged and the headphones turned off, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the device immediately afterwards with a clean cloth. Do not use abrasive cloth, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering. www.insigniaproducts.com 17