Insignia NS-HDRAD User Manual (English) - Page 8
Setting up your HD Radio Tabletop
View all Insignia NS-HDRAD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-HDRAD HD Radio™ Tabletop HD Radio mode HD Radio mode is the new digital mode for FM. Many HD Radio stations have several sub-channels called "multicast channels." When receiving an HD Radio signal, the "HD" icon and the channel number appear on the display. RBDS mode RDS (Radio Data System) mode provides additional functionality to FM radio reception by transmitting encoded analog information with the FM radio signal. This signal is decoded by an RDS receiver and can provide a range of informational features including the station's name. The RDS text is usually centered. When the text fills the display, it begins scrolling. When receiving an RBDS signal, the "RBDS" icon appears on the display. Setting up your HD Radio Tabletop Powering your radio Your HD Radio Tabletop can be powered by either the included AC adapter, or by using four AA sized alkaline batteries. Your tabletop radio only operates on batteries if the AC adapter is unplugged. Installing the batteries To install the batteries: 1 Open the battery compartment on the back of your radio. 2 Place four AA size batteries (alkaline) in the battery compartment. Make sure to match the + and - on the battery to the + and - signs in the battery compartment. 3 Close the battery compartment until it clicks into place. Caution • When you replace the batteries, make sure that you use batteries of the same type and voltage. The batteries are AA size alkaline. • All batteries should be replaced at the same time. • Dispose of used batteries by following your local hazardous waste regulations. • If you don't plan to use your radio for an extended period of time, remove the batteries to prevent damage. Note The low battery icon flashes when the batteries reach 20% of capacity. 8 www.insigniaproducts.com