Insignia NS-HWG1965 User Guide - Page 17
Step 12: Attach doors to the vertical panels, You'll need
View all Insignia NS-HWG1965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
TV Console for up to 75" TVs Step 12: Attach doors to the vertical panels 1 Push the knob bolts (Y) through the inside of each door (L), then screw on the knobs (X). 2 Attach a door (L) to the right side panel (C) by engaging both door hinges together as shown: A Extend both hinges of the door (L) to the open position, if needed. B Slide the back hooks (on the door hinges) into the slots on the ends of the mounting bases. C Once the back hooks are inserted into place, push in the back of the hinge arm to secure it to the mounting base. D Repeat the same process to attach the other doors (L) to left side panel (B) and partition panel (D). Tip: If you need to remove a door, press the release lever on the end of the hinge arm. 3 Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on the hinge arm for a better fit. Tip: If you need additional information on how to assemble the hinges, go to www.guides.sellpoints.com to view step-by-step instructional videos. Slot Hooks Mounting base Release lever Hinge arm You'll need: Push in the back of the hinge arm X (4) Y (4) Phillips screwdriver www.insigniaproducts.com 17