Insignia NS-HWG1965 User Guide - Page 20
Step 15: Change the door panel, You'll need
View all Insignia NS-HWG1965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
NS-HWG1965 Step 15: Change the door panel Follow these steps if you want to change your TV stand's door panels from glass to wood. Otherwise, skip to "Step 16: Position the TV stand and install the tipping restraint hardware kit" on page 21. 1 Open a door (L) and loosen the screws on the inside of the door frame. 2 Rotate the clips to remove the old panel. 3 Insert the new panel, then rotate the clips and tighten the screws to secure the panel in the door frame. 4 Repeat this process to replace all the door panels. Glass door panel Wood door panel Clip You'll need: Phillips screwdriver 20 www.insigniaproducts.com
20
NS-HWG1965
www.insigniaproducts.com
Step 15: Change the door panel
Follow these steps if you want to change your TV stand’s door panels from glass to wood. Otherwise, skip
to “Step 16: Position the TV stand and install the tipping restraint hardware kit” on page 21.
1
Open a door (L) and loosen the screws on the inside of the door frame.
2
Rotate the clips to remove the old panel.
3
Insert the new panel, then rotate the clips and tighten the screws to secure the panel in the door frame.
4
Repeat this process to replace all the door panels.
You’ll need:
Glass door
panel
Wood door
panel
Clip
Phillips screwdriver