Insignia NS-L19W1Q-10A User Manual (English) - Page 15
No converter/descrambler box, Connecting cable TV viacable TV box
UPC - 600603122293
View all Insignia NS-L19W1Q-10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
No converter/descrambler box To connect cable TV without a converter/descrambler box: 1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV. Connecting cable TV via a cable TV box 1 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 2 Depending on the jacks available on the cable box, connect a cable from the outgoing jacks on the cable box to the corresponding jacks on the back of your TV. The connection can be to the cable-out, HDMI, component video, S-Video, or AV jack. Back of TV 2 Connect the other end of the cable to the cable TV wall outlet. With converter/descrambler box If your cable box descrambles only some channels (such as premium channels), you need a two-way splitter, an RF (A/B) switch, and four lengths of antenna cable. The two-way splitter and RF switch are not provided. To connect cable TV with a converter/descrambler box: • Use the following illustration as a guide to connect a converter/descrambler box. Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls. RF switch A Two-set signal splitter B Out In TV Cable converter/descrambler box HDMI Video or S-Video Component Cable box 3 If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the cable box. www.insigniaproducts.com 11