Insignia NS-OTR16WH9 User Guide - Page 14

NS-OTR16SS9 / NS-OTR16WH9 Cleaning and replacing the filters Cleaning the grease filters Clean the filters at least once a month. Never use the fan or microwave without the filters in place. 1 Pull down slightly on the tab toward the front of the microwave to remove the filter. Repeat for the other filter. 2 Soak the filter in a sink or dish pan filled with hot water and detergent. CAUTION DO NOT use ammonia or other alkali. They will react with the filter material and darken it. 3 Agitate and scrub the filter with a brush to remove embedded dirt. 4 Rinse thoroughly and shake dry. 5 Replace by fitting the filter back into the opening. BOTTOM Grease filters Replacing the charcoal filter A charcoal filter is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use. 1 Disconnect power to the microwave at the circuit breaker or by unplugging it. 2 Remove the louver mounting screws from the top center of the louver, then push down on the tabs at each end of the louver to disengage it. Louver mounting screws 3 Pull the louver away from the unit. Louver 14 www.insigniaproducts.com