Insignia NS-PS06CC User Manual - Page 9
Specifications
View all Insignia NS-PS06CC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Symptom The shredder runs in Rev mode but not in On/Auto mode. There is a paper jam in the shredder. The shredder will not stop running. Possible Solutions • While in On/Auto mode, the motor will not start running until paper is inserted into the feed slot. Set the unit to On/Auto and insert the paper to be shredded. It is normal for the motor to run for a moment after setting it to On/Auto but it should stop until paper is inserted. The sensor that activates the shredder in On/ Auto mode is located directly in the center of the slot. If the paper you are inserting is narrow, it may not be detected by the sensor. It is possible that the sensor, which activates the shredder, has become blocked with paper. Insert an index card, directly in the center of the feed slot, and apply force. This will usually clear any paper blocking the sensor. • Switch the shredder over into Rev (reverse) mode. While in reverse, the shredder will back up and loosen the jammed paper. If required, you may need to tug and remove several sheets to effectively clear the machine. When jammed paper is loosened or removed, switch back to the On/Auto mode to continue shredding. Repeat steps if needed. CAUTION: Keep your hands away from the feed opening. • With stubborn situations where the reverse function does not help, you may loosen the jammed paper with shredder oil (cooking oil is acceptable, nothing aerosol). Start by drizzling oil into the blades where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return the shredder back to On/Auto mode. If required, a rigid sheet of cardstock (old greeting card, folded file folder, or a sheet torn from a cereal box) can be fed into the shredder to help push the jammed paper through. • The sensor that activates the shredder may be blocked. Insert a sheet of paper to clear the sensor. Specifications Product dimensions Duty cycle Sheet capacity Paper shred size Paper entry width Credit card capacity Power source Basket capacity 14.3 in H x 12.5 in W x 7.3 in D (36.2cm x 31.8cm x 18.5cm ) 2 minutes ON / 30 minutes OFF Six sheets of 20 lb. bond paper (one folded sheet of paper equals two sheets of paper.) 0.19 x 1.34 in (5 x 34 mm) 8.8 in (225 mm) One at a time US - AC 120V, 60Hz, 1.5 A 3.5 gal. (12 L) www.insigniaproducts.com 9