Insignia NS-RFD26XSS0 User Guide - Page 9

NO. ITEM 9 10 11 12 13 25.4 Cu. Ft. French Door Counter Depth Refrigerator DESCRIPTION Blinks when it's time to change the water filter. See "Replacing the water filter" on page 31. C Displays the refrigerator temperature setting. See Setting the refrigerator temperature on page 25. F Press to switch between Fahrenheit or Celsius. The indicator lights up when Fahrenheit is selected. Press repeatedly to adjust the refrigerator temperature from 46° to 36° F (8° to 2° C). Press and hold for three seconds to turn on the super cool function, which reduces the refrigerator temperature to 36° F (2° C) for three hours, then reverts back to its last setting. Press to dispense Water. The icon lights up to show your selection. Setting up your refrigerator Before using your refrigerator Unpacking your refrigerator • Remove the interior packing and throw it away or recycle it. • If your refrigerator has been in a horizontal or tilted position for any period of time, let your refrigerator stand upright for approximately two hours before connecting it to power. This lets the oil settle into the compressor and reduces the possibility of a malfunction in the cooling system from incorrect handling during transportation. • Remove tape and glue residue from surfaces before turning on your refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. Note: Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see "IMPORTANT SAFETY INSTRUCTIONS" on page 3. • Wash the inside with a damp warm cloth soaked in a solution of one quart of lukewarm water to two tablespoons of baking soda. See "Cleaning your refrigerator" on page 30 for more information. • Wait for approximately 10 minutes after moving your refrigerator or plugging it in for the first time so that the coolant fluid settles. • For correct operation, you should level your refrigerator using the leveling feet. If you do not level your refrigerator, the doors may not close or seal correctly, causing cooling, frost, and moisture problems. Turn the leveling feet clockwise to raise or counterclockwise to lower a side. The leveling feet are easier to adjust if you have someone push against the top of your refrigerator to take some weight off. • When moving your refrigerator, do not tilt it beyond 45° from upright. WARNING: Excessive Weight Hazard • Use two or more people to move and install your refrigerator. Failure to do so can result in back or other injury. • Handle with care when moving your refrigerator to avoid either damaging the refrigerant tubing or increasing the risk of a leak. WARNING: Fire or Explosion Hazard • Do not puncture the refrigerant tubing. • Follow handling instructions carefully. • Your refrigerator uses flammable refrigerant. • Failure to do so can result in death, explosion, or fire. www.insigniaproducts.com 9