Insignia NS-S6000 User Manual (English) - Page 10
Troubleshooting, Specifications
View all Insignia NS-S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
NS-S6000 6½" 3-Way 70-Watt Car Stereo Speakers Troubleshooting Problem Possible cause Solution No sound The volume is set too low. Increase the volume. Connections are loose or Make sure that power and speaker incorrect. leads are connected correctly and securely. The vehicle's audio system is damaged. Take the vehicle to a repair shop for service. Distorted sound Audio wires are connected incorrectly. Make sure that the wires are connected with the correct polarity (+ or -). The speaker wires or speaker is damaged. The vehicle's audio system is damaged. Replace the speaker wires or speaker. Take the vehicle to a repair shop for service. Note Good ground connections eliminate most electrical noise problems and require tight contact with the metal vehicle chassis. Remove plastics, paint, or rust at the grounding connections for good electrical contact. If you are still having difficulty, contact Insignia. Specifications Specifications are subject to change without notice. Loudspeaker cone Woofer: 6.3 inches (16 cm) electroplate injection Magnets Main: Ferrite 10 Oz Tweeter: Neodymium Peak output power 70 W Rated output power 35 W Impedance 4 Ohm Sensitivity 89 dB Frequency response 65 to 20000 Hz Dimensions 6.92 × 3.23 inches (176 × 82 mm) Weight Net: 2.14 lbs. (0.97 kg) Gross: 4.74 lbs (2.15 kg) Box dimension (L × H × W) 14.69 × 8.39 × 5.16 inches (373 × 213 × 131 mm) 10 www.insignia-products.com