Insignia NS-S6000 User Manual (English) - Page 9

NS-S6000 6½" 3-Way 70-Watt Car Stereo Speakers 3 Slide the screw clips over the screw holes so the holes in the clips align with the screws holes in the vehicle panel. 0.295" (7.5 mm) (from edge to screw hole center) 4 Insert the speaker into the hole, then align the screw holes in the speaker with the screw holes in the vehicle panel. 5 Insert the screws into the screw holes. 6 Gradually tighten the screws. Make sure that you tighten the screws evenly so you do not warp the speaker frame. To test the speakers: 1 Reconnect the negative terminal on the vehicle battery, then turn on the vehicle. 2 Make sure that the volume on your audio system is turned down, then turn on your audio system. 3 Gradually increase the volume. To install the speaker grills: 1 Place the speaker grill over the speaker so the screws holes in the grill align with the screw holes in the speaker frame. Make sure that the grill fits securely against the speaker frame. There should not be any gaps or holes between the grill and the frame. 2 Insert screws into the screws on the grill, then carefully tighten the screws. www.insignia-products.com 9