Insignia NS-WBRDVD2-CA User Manual (English) - Page 9

NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 5 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player Connecting a TV using an HDMI cable (best) To connect a TV using an HDMI cable: • Connect an HDMI cable to the HDMI jack on the back of your player and to the HDMI IN jack on the TV. TV Back of player Connecting a TV using an A/V cable (good) To connect a TV using an AV cable: • Connect an A/V cable to the VIDEO OUT and AUDIO OUT L/R jacks on the back of your player and to the VIDEO IN and AUDIO IN L/R jack on the TV. Jacks and cable connectors are usually color-coded. Make sure that you match the colors. Back of player TV Notes • • Only the HDMI is capable of 1080p video output and the highest definition audio codecs. An HDMI cable carries both video and audio. If you want to use TV speakers, you do not need to make an audio connection if you are using an HDMI cable. If you want to use an HDMI-capable audio receiver, connect an HDMI cable between your player and the HDMI input on the receiver. Connecting a TV using a component video cable (better) Note High definition video (up to 1080i) is supported with a component video cable. To connect a TV using component cables: 1 Connect a component video cable to the COMPONENT VIDEO OUT jacks on the back of your player and to the COMPONENT VIDEO IN jacks on the TV. Audio cable Yellow=Video White=Left audio Red=Right audio Note The A/V cable can only send standard-definition video (480i) to your TV. Connecting audio to an amplifier or home theater system To connect audio to an analog amplifier: • Connect an audio cable to the AUDIO OUT L/R jacks on the back of your player and to the AUDIO IN L/R jacks on the receiver. Analog audio receiver Back of player Audio cable TV Back of player Component video cables 2 Connect an audio cable to the AUDIO OUT L/R jacks on the back of your player and to the AUDIO IN L/R jacks on the TV. To connect audio to a digital amplifier or home theater system: • Connect a digital optical cable from the OPTICAL DIGITAL OUT jack on the back of your player to the OPTICAL DIGITAL IN jack on the receiver. - Or - Connect a digital coaxial cable from the COAXIAL DIGITAL OUT jack on the back of your player to the COAXIAL DIGITAL IN jack on the receiver. Home theater system Back of player Connect to the OPTICAL DIGITAL OUT jack Connect to the COAXIAL DIGITAL OUT jack www.insigniaproducts.com 5