Insignia NS-WC29SS3 User Guide - Page 12
Using your cooler, Setting the temperature, Memory function, Using the display, Using Quick Cool mode
View all Insignia NS-WC29SS3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using your cooler Setting the temperature • Press the temperature up or down buttons to increase or decrease the temperature by one degree. The temperature range is 41° ~ 64° F (5° ~ 18° C). • Press and hold the temperature up and down buttons at the same time to switch between Fahrenheit and Celsius. Notes: • A large number of bottles lowers the cooling efficiency of your cooler. • When you put several bottles of wine in your cooler at one time, the temperature in your cooler may rise temporarily. • Adjust the thermostat setting by one increment at a time. Allow several hours for the temperature to stabilize between adjustments. • The screen display always shows the set temperature. When adjusting the temperature, the temperature display blinks to indicate that the temperature is being adjusted. Memory function When your cooler is turned off, it remembers the currently set temperature and returns to that setting when it's turned back on. Using the display • When you plug in your cooler for the first time, the display screen turns on for three seconds, and you hear a start-up tone. • In normal mode, the display shows the set temperature. Lighting your cooler • Press the light button to turn the interior light on or off. A beep sounds when the light is turn on or off. Using Quick Cool mode • Press and hold the Power on/Standby and Light buttons at the same time for three seconds to enter or quit the quick cool mode. The display shows "FC" under Quick Cool mode. The cooler will quit quick cool mode automatically after a maximum of 24 hours. Using the wine shelves • All of the shelves have tabs to engage the cabinet on both sides. • Any of the shelves can be removed to accommodate larger bottles. To remove a shelf: 1 Remove all bottles from the shelves. 2 Lift the shelf upward, then gently pull out the shelf. 3 To replace a shelf, place the sides of the shelf back onto the supporting guides in the cabinet and push back until the shelf tabs slide into place. CAUTION: Make sure that the tabs are firmly engaged in the supporting guides before storing any bottles. 12 www.insigniaproducts.com