Intel BLKD865GBF Product Specification - Page 117
Table 62., SATA/PATA Submenus
View all Intel BLKD865GBF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
BIOS Setup Program Table 62. SATA/PATA Submenus Feature Drive Installed Type Maximum Capacity LBA/Large Mode Block Mode PIO Mode DMA Mode S.M.A.R.T. Cable Detected Options No options • Auto (default) • User No options • Disabled • Auto (default) • Disabled • Auto (default) Auto (default) 0 1 2 3 4 • Auto (default) • SWDMA0 • SWDMA1 • SWDMA2 • MWDMA0 • MWDMA1 • MWDMA2 • UDMA0 • UDMA1 • UDMA2 • Auto (default) • Disabled • Enabled No options Description Displays the type of drive installed. Specifies the IDE configuration mode for IDE devices. User allows capabilities to be changed. Auto fills-in capabilities from ATA/ATAPI device. Displays the drive capacity. Displays whether automatic translation mode is enabled for the hard disk. (This item is read-only unless Type is set to User.) Displays whether automatic multiple sector data transfers are enabled. (This item is read-only unless Type is set to User.) Sets the PIO mode. (This item is read-only unless Type is set to User.) Specifies the DMA mode for the drive. Auto = Auto-detected SWDMAn = Single Word DMAn SWDMAn = Multi Word DMAn UDMAn = Ultra DMAn (This item is read-only unless Type is set to User.) Enables/disables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology). (This item is read-only unless Type is set to User.) Displays the type of cable connected to the Parallel ATA IDE interface: 40-conductor or 80-conductor (for ATA-100 peripherals). Note: If an LS-120 drive is attached to the system, a row entitled ARMD Emulation Type will be displayed in the above table. The BIOS will always recognize the drive as an ATAPI floppy drive. The ARMD Emulation Type should always be set to Floppy. 117