Intel BLKD945GCCRL Product Specification - Page 61
I/O Shield
View all Intel BLKD945GCCRL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Technical Reference 2.9.2 I/O Shield The back panel I/O shield for the board must meet specific dimension and material requirements. Systems based on this board need the back panel I/O shield to pass certification testing. Figure 18 shows the I/O shield dimensions. Dimensions are given in millimeters [inches]. The figures also indicate the position of each cutout. Additional design considerations for I/O shields relative to chassis requirements are described in the ATX specification. NOTE The I/O shield drawing is for reference only. I/O shields compliant with the ATX chassis specification are available from Intel. Figure 18. I/O Shield Dimensions 61
Technical Reference
61
2.9.2
I/O Shield
The back panel I/O shield for the board must meet specific dimension and material
requirements.
Systems based on this board need the back panel I/O shield to pass
certification testing.
Figure 18 shows the I/O shield dimensions.
Dimensions are
given in millimeters [inches].
The figures also indicate the position of each cutout.
Additional design considerations for I/O shields relative to chassis requirements are
described in the ATX specification.
±
NOTE
The I/O shield drawing is for reference only.
I/O shields compliant with the ATX
chassis specification are available from Intel.
Figure 18.
I/O Shield Dimensions