Intel BLKD945GCCRL Product Specification - Page 63
Fan Header Current Capability, Power Supply Considerations
View all Intel BLKD945GCCRL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Technical Reference 2.10.3 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 29 lists the current capability of the fan headers. Table 29. Fan Header Current Capability Fan Header Processor fan Front chassis fan Rear chassis fan Maximum Available Current 2.0 A 1.5 A 1.5 A 2.10.4 Power Supply Considerations CAUTION The +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. System integrators should refer to the power usage values listed in Table 28 when selecting a power supply for use with the board. Additional power required will depend on configurations chosen by the integrator. The power supply must comply with the following recommendations found in the ATX form factor specification: • The potential relation between 3.3 VDC and +5 VDC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances 63