Intel BLKD945GCPE Product Specification - Page 49
Electrical Considerations
![]() |
UPC - 735858195201
View all Intel BLKD945GCPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Technical Reference 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator. The power supply must comply with the indicated parameters of the ATX form factor specification. • The potential relation between 3.3 VDC and +5 VDC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a system consisting of a supported 65 W processor (see section 1.3 on page 15 for a list of supported processors), 1 GB DDR2 RAM, one hard disk drive, one optical drive, and all board peripherals enabled, the minimum recommended power supply is 200 W. Table 22 lists the recommended power supply current values. Table 22. Recommended Power Supply Current Values Output Voltage 3.3 V 5 V 12 V1 12 V2 Current 8.1 A 9.3 A 0.9 A 8.2 A -12 V 0.3 A 5 VSB 0.2 A For information about Selecting an appropriate power supply Refer to http://support.intel.com/support/motherboards/desktop/sb/CS-026472.htm 49
![](/manual_guide/products/intel-blkd945gcpe-product-specification-0472066/49.png)