Intel BLKDP45SG Product Guide - Page 29
Installing and Removing a Processor, Installing a Processor
![]() |
UPC - 735858200363
View all Intel BLKDP45SG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install the processor on the Desktop Board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 21). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 25. 2. Open the socket lever by pushing the lever down and away from the socket (Figure 6, A and B). Figure 6. Lift the Socket Lever 29
![](/manual_guide/products/intel-dp45sg-product-guide-eaf0f1d/29.png)
Installing and Replacing Desktop Board Components
29
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 3 on page 21).
Failure to do so could damage the processor and the
board.
To install a processor, follow these instructions:
1.
Observe the precautions in "Before You Begin" on page 25.
2.
Open the socket lever by pushing the lever down and away from the socket
(Figure 6, A and B).
Figure 6.
Lift the Socket Lever