Intel BLKDP45SG Product Guide - Page 52

Connecting Power Supply Cables

Get Intel BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX PDF manuals and user guides
UPC - 735858200363
View all Intel BLKDP45SG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Intel Desktop Board DP45SG Product Guide Connecting Power Supply Cables CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board or the system may not function properly. The 2 x 12 pin main power connector on the Desktop Board is backwards compatible with ATX12V power supplies with 2 x 10 connectors. Use of the 1 x 4 power connector is required with ATX12V power supplies when using PCI Express add-in cards that can consume up to 75 W. Figure 26 shows the location of the power connectors. Figure 26. Connecting Power Supply Cables 1. Observe the precautions in "Before You Begin" on page 25. 2. Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin connector. 3. Connect the 1 x 4 power supply cable to the 1 x 4 connector. 4. Connect the main power supply cable to the 2 x 12 pin connector. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Intel Desktop Board DP45SG Product Guide
52
Connecting Power Supply Cables
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin)
power connector to the Desktop Board may result in damage to the board or the
system may not function properly.
The 2 x 12 pin main power connector on the Desktop Board is backwards compatible
with ATX12V power supplies with 2 x 10 connectors.
Use of the 1 x 4 power connector
is required with ATX12V power supplies when using PCI Express add-in cards that can
consume up to 75 W.
Figure 26 shows the location of the power connectors.
Figure 26.
Connecting Power Supply Cables
1.
Observe the precautions in "Before You Begin" on page 25.
2.
Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin
connector.
3.
Connect the 1 x 4 power supply cable to the 1 x 4 connector.
4.
Connect the main power supply cable to the 2 x 12 pin connector.