Intel BLKDP965LTCK Product Specification - Page 18
System Memory
UPC - 200001254772
View all Intel BLKDP965LTCK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board DP965LT Technical Product Specification 1.4 System Memory The board has four DIMM sockets and support the following memory features: • 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMS with x16 organization are not supported. • 8 GB maximum total system memory using DDR2 667 or DDR2 533 DIMMs; 4 GB maximum total system memory using DDR2 800 DIMMs. Refer to Section 2.1.1 on page 43 for information on the total amount of addressable memory. • Minimum total system memory: 128 MB • Non-ECC DIMMs • Serial Presence Detect • DDR2 800, DDR2 667, or DDR2 533 MHz SDRAM DIMMs • DDR2 800 DIMMs with SPD timings of only 5-5-5 or 6-6-6 (tCL-tRCD-tRP) NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency. Table 3 lists the supported DIMM configurations. Table 3. Supported Memory Configurations DIMM Type SDRAM Technology Smallest usable DIMM (one x16 Single-sided DIMM) Largest usable DIMM (one x8 Double-sided DIMM) DDR2 533 256 Mbit 128 MB 512 MB DDR2 533 512 Mbit 256 MB 1 GB DDR2 533 1 Gbit 512 MB 2 GB DDR2 667 256 Mbit 128 MB 512 MB DDR2 667 512 Mbit 256 MB 1 GB DDR2 667 1 Gbit 512 MB 2 GB DDR2 800 256 Mbit 128 MB 512 MB DDR2 800 512 Mbit 256 MB 1 GB Maximum capacity with four identical x8 Double-sided DIMMs 2 GB 4 GB 8 GB 2 GB 4 GB 8 GB 2 GB 4 GB 18