Intel D845EBG2 Product Guide - Page 23
Installing and Removing the Desktop Board, WARNING, NOTES - desktop board manual
UPC - 735858153287
View all Intel D845EBG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing and Replacing Desktop Board Components Installing and Removing the Desktop Board Refer to your chassis manual for instructions on installing and removing the Intel desktop board. WARNING Only qualified technical personnel should do this procedure. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. ✏ NOTES You will need a Phillips† (#2 bit) screwdriver. Refer to Appendix B for regulatory requirements and installation instructions and precautions. Figure 5 shows the location of the eight mounting holes for the Desktop Board D845EBG2. The Desktop Board D845EPT2 has six mounting holes. OM13668 Figure 5. Desktop Board D845EBG2 Mounting Holes 23