Intel D845EPT2 D845EPT2_D845EBG2_TechProdSpec. - Page 30
Audio Subsystem Optional - audio drivers
View all Intel D845EPT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Intel Desktop Board D845EBG2/D845EPT2 Technical Product Specification 1.10 Audio Subsystem (Optional) The audio subsystem consists of the following devices: • Intel 82801DB I/O Controller Hub (ICH4) • Analog Devices AD1981A audio codec (optional) The audio subsystem includes these features: • Split digital/analog architecture for improved S/N (signal-to-noise) ratio: ≥ 85 dB • Power management support for ACPI 2.0 (driver dependant) • Mic in pre-amp that supports dynamic, condenser, and electret microphones The audio subsystem supports the following audio interfaces: • ATAPI-style connectors: Auxiliary line in CD-ROM • Front panel audio connector, including pins for: Line out Mic in • Back panel audio connectors (optional): Line out Line in Mic in Figure 6 is a block diagram of the audio subsystem. 82801DB I/O Controller Hub (ICH4) AC '97 Link AD1981A Audio Codec Line In Line Out Mic In Auxiliary Line In CD-ROM Figure 6. Audio Subsystem Block Diagram OM14261 For information about Upgrading the onboard audio subsystem using a CNR audio card The front panel audio connector The optional back panel audio connectors Refer to Section 1.12, page 33 Section 2.8.3, page 70 Section 2.8.1, page 54 30