Intel D845PT Quick Reference Guide - Page 17
Installing an AGP Card, Connecting the Fans, s metal bracket to the chassis back panel with a screw.
View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
8 Installing an AGP Card ✏ NOTE The D845PT and D845BG boards are only compatible with 1.5 V AGP cards. Follow these instructions to install an AGP card if it has a retention notch. 1. Observe the precautions in "Before You Begin" on page 3. 2. Place the AGP card in the AGP connector. 3. Press down on the card until it is completely seated in the connector and the card retention notch snaps into place below the RM. 4. Secure the card's metal bracket to the chassis back panel with a screw. 9 Connecting the Fans The following figure shows the location of the fan connectors. Connect the processor's fan heatsink cable to the processor fan connector on the board. Connect the chassis fan cables to the board connectors as shown in the figure below. Chassis Rear Fan 13 J1B2 Chassis Front Fan 3 1 J8F2 Intel Desktop Boards D845PT and D845BG Quick Reference Processor Fan 1 3 J1D2 OM12644 17