Intel D850MV Product Guide - Page 23

Installing and Removing the Desktop Board, WARNING, NOTES - z manual

Get Intel D850MV - Desktop Board Motherboard PDF manuals and user guides View all Intel D850MV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installing and Replacing Desktop Board Components Installing and Removing the Desktop Board Refer to your chassis manual for instructions on installing and removing the board. The D850MD board is secured to the chassis by eight screws and the D850MV board by 11 screws. See Figure 5 and Figure 6 for the locations of the mounting screw holes of each board. WARNING This procedure should be done only by qualified technical personnel. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. ✏ NOTES You will need a Phillips† (#2 bit) screwdriver. Refer to Appendix B on page 81 for regulatory requirements and installation instructions and precautions. Figure 5 shows the location of the mounting holes for the D850MD board. OM11831 Figure 5. D850MD Board Mounting Screw Holes 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Installing and Replacing Desktop Board Components
23
Installing and Removing the Desktop Board
Refer to your chassis manual for instructions on installing and removing the board.
The D850MD
board is secured to the chassis by eight screws and the D850MV board by 11 screws.
See Figure 5
and Figure 6 for the locations of the mounting screw holes of each board.
WARNING
This procedure should be done only by qualified technical personnel.
Disconnect the computer
from its power source before performing the procedures described here.
Failure to disconnect
the power before you open the computer can result in personal injury or equipment damage.
✏
NOTES
You will need a Phillips
†
(#2 bit) screwdriver.
Refer to Appendix B on page 81 for regulatory requirements and installation instructions and
precautions.
Figure 5 shows the location of the mounting holes for the D850MD board.
OM11831
Figure 5.
D850MD Board Mounting Screw Holes