Intel D915PDT D915PDT Technical Product Specification - Page 31
Alert Standard Format ASF Support, LAN Subsystem Software
View all Intel D915PDT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Product Description Table 5 describes the LED states when the board is powered up and the 10/100 Mbits/sec LAN subsystem is operating. Table 5. LAN Connector LED States LED Color Green Yellow LED State Off On Blinking Off On Condition LAN link is not established. LAN link is established. LAN activity is occurring. 10 Mbits/sec data rate is selected. 100 Mbits/sec data rate is selected. 1.9.2 Alert Standard Format (ASF) Support The board provides the following ASF support for PCI Express x1 bus add-in LAN cards and PCI Conventional bus add-in LAN cards installed in PCI Conventional bus slot 2: • Monitoring of system firmware progress events, including: ⎯ BIOS present ⎯ Primary processor initialization ⎯ Memory initialization ⎯ Video initialization ⎯ PCI resource configuration ⎯ Hard-disk initialization ⎯ User authentication ⎯ Starting operating system boot process • Monitoring of system firmware error events, including: ⎯ Memory missing ⎯ Memory failure ⎯ No video device ⎯ Keyboard failure ⎯ Hard-disk failure ⎯ No boot media • Boot options to boot from different types of boot devices • Reset, shutdown, power cycle, and power up options • LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. 1.9.3 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For information about Refer to Obtaining LAN software and drivers Section 1.2, page 15 31