Intel D945GBO Product Specification - Page 62
Jumper Block
View all Intel D945GBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Intel Desktop Board D945GBO Technical Product Specification 2.8 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 20 shows the location of the jumper block. The jumper block determines the BIOS Setup program's mode. Table 28 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. 1 3 J6F1 Figure 20. Location of the Jumper Block OM17937 Table 28. BIOS Setup Configuration Jumper Settings Function/Mode Normal Jumper Setting 1-2 1 Configuration The BIOS uses current configuration information and passwords for booting. Configure Recovery 3 2-3 1 3 None 1 3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 62