Intel D945GBO English Product Guide - Page 41
Connecting USB 2.0 Headers, Connecting IEEE 1394a Headers, Connecting the Front Panel Header
View all Intel D945GBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing and Replacing Desktop Board Components Connecting USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, C on page 39 for the location of the black USB 2.0 headers. Table 8 shows the pin assignments for the USB 2.0 headers. Table 8. USB 2.0 Header Signal Names USB Port A Pin Signal Name 1 POWER 3 D- 5 D+ 7 GND 9 KEY Note: USB ports may be assigned as needed. Pin 2 4 6 GND 10 USB Port B Signal Name POWER DD+ Ground NO CONNECT Connecting IEEE 1394a Headers Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, D on page 39 for the location of the blue IEEE 1394a headers. Table 9 shows the pin assignments for the headers. Table 9. Pin 1 3 5 7 9 IEEE 1394a Header Signal Names Signal Name Pin TPA1+ 2 GND 4 TPA2+ 6 +12 V 8 KEY (no pin) 10 Signal Name TPA1GND TPA2+12 V GND Connecting the Front Panel Header Before connecting the front panel header, observe the precautions in "Before You Begin" on page 23. See Figure 20, F on page 39 for the location of the multi-colored front panel header. Table 10 shows the pin assignments for the front panel header. Table 10. Front Panel Header Signal Names Pin Signal In/Out Description Pin Signal In/Out Description Hard Drive Activity LED (Orange) Power LED (Green) 1 HD_PWR Out Hard disk LED pull- 2 HDR_BLNK_GRN Out Front panel green up (330 Ω) to +5 V LED 3 HDA# Out Hard disk active LED 4 HDR_BLNK_YEL Out Front panel yellow LED Reset Switch (Purple) On/Off Switch (Red) 5 GND Ground 6 SWITCH_ON# In Power switch 7 FP_RESET# In Reset switch 8 GND Ground 9 5+ V Reserved. Do not use. 10 No pin No pin 41