Intel D945PLNM D945PLNM Technical Product Specification - Page 20

Intel, 945PL Chipset - audio drivers

Page 20 highlights

Intel Desktop Board D945PLNM Technical Product Specification 1.5 Intel® 945PL Chipset The Intel 945PL chipset consists of the following devices: • Intel 82945PL Memory Controller Hub (MCH) with Direct Media Interface (DMI) interconnect • Intel 82801G I/O Controller Hub (ICH7) with DMI interconnect The MCH component provides interfaces to the CPU, memory, PCI Express, and the DMI interconnect. The ICH7 is a centralized controller for the board's I/O paths. For information about The Intel 945PL chipset Resources used by the chipset Refer to http://developer.intel.com/ Chapter 2 1.5.1 USB The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The ICH7 provides the USB controller for all ports. The port arrangement is as follows: • Four ports are implemented with dual stacked back panel connectors adjacent to the audio connectors. These connectors are yellow, indicating that they support USB anti-theft circuitry. • Four ports are routed to two separate front panel USB connectors. These connectors do not support USB anti-theft circuitry. NOTE USB anti-theft circuitry requires the use of Intel® Platform Administration Technology software. Contact your Intel representative for more information. NOTE Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device is attached to the cable. Use shielded cable that meets the requirements for full-speed devices. For information about The location of the USB connectors on the back panel The location of the front panel USB connectors Refer to Figure 12, page 47 Figure 13, page 48 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

Intel Desktop Board D945PLNM Technical Product Specification
20
1.5 Intel
®
945PL Chipset
The Intel 945PL chipset consists of the following devices:
Intel 82945PL Memory Controller Hub (MCH) with Direct Media Interface (DMI) interconnect
Intel 82801G I/O Controller Hub (ICH7) with DMI interconnect
The MCH component provides interfaces to the CPU, memory, PCI Express, and the DMI
interconnect.
The ICH7 is a centralized controller for the board’s I/O paths.
For information about
Refer to
The Intel 945PL chipset
Resources used by the chipset
Chapter 2
1.5.1
USB
The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and
EHCI-compatible drivers.
The ICH7 provides the USB controller for all ports.
The port arrangement is as follows:
Four ports are implemented with dual stacked back panel connectors adjacent to the audio
connectors.
These connectors are yellow, indicating that they support USB anti-theft circuitry.
Four ports are routed to two separate front panel USB connectors.
These connectors do not
support USB anti-theft circuitry.
±
NOTE
USB anti-theft circuitry requires the use of Intel
®
Platform Administration Technology software.
Contact your Intel representative for more information.
±
NOTE
Computer systems that have an unshielded cable attached to a USB port may not meet FCC
Class B requirements, even if no device is attached to the cable.
Use shielded cable that meets the
requirements for full-speed devices.
For information about
Refer to
The location of the USB connectors on the back panel
Figure 12, page 47
The location of the front panel USB connectors
Figure 13, page 48