Intel D945PLNM D945PLNM Technical Product Specification - Page 56

Jumper Block

Get Intel D945PLNM PDF manuals and user guides View all Intel D945PLNM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Intel Desktop Board D945PLNM Technical Product Specification 2.8 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 16 shows the location of the jumper block. The jumper block determines the BIOS Setup program's mode. Table 27 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. 31 J7J3 Figure 16. Location of the Jumper Block OM18290 Table 27. BIOS Setup Configuration Jumper Settings Function/Mode Normal Configure Jumper Setting 1-2 3 1 2-3 3 1 Configuration The BIOS uses current configuration information and passwords for booting. After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 3 The BIOS attempts to recover the BIOS configuration. A 1 recovery diskette is required. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Intel Desktop Board D945PLNM Technical Product Specification
56
2.8 Jumper Block
CAUTION
Do not move the jumper with the power on.
Always turn off the power and unplug the power cord
from the computer before changing a jumper setting.
Otherwise, the board could be damaged.
Figure 16 shows the location of the jumper block.
The jumper block determines the BIOS Setup
program’s mode.
Table 27 describes the jumper settings for the three modes:
normal, configure, and
recovery.
When the jumper is set to configure mode and the computer is powered-up, the BIOS
compares the processor version and the microcode version in the BIOS and reports if the two match.
OM18290
J7J3
3
1
Figure 16.
Location of the Jumper Block
Table 27.
BIOS Setup Configuration Jumper Settings
Function/Mode
Jumper Setting
Configuration
Normal
1-2
1
3
The BIOS uses current configuration information and
passwords for booting.
Configure
2-3
1
3
After the POST runs, Setup runs automatically.
The
maintenance menu is displayed.
Recovery
None
1
3
The BIOS attempts to recover the BIOS configuration.
A
recovery diskette is required.